BOSTIK CONTACT N320

Product Codes

Yellow 30617216 5 litres x4

DataSheets

Technical Data Sheet

tds02138-bostik-contact-n320-multi-1.pdf

Safety Data Sheet

https://www.bostik.com/files/live/sites/shared_bostik/files/Documents%26Brochures%20(new)/United%20Kingdom/Documents/SDS/30617216_MTR_UCLP_BE%20sds.pdf

Product
Characteristics

Coverage 3 – 4m2 per litre (15 – 20m2 per tin) when applied by a notched spreader. 4 – 5m2 per litre (20 – 25m2 per tin) when applied by brush. (depending on the trowel used, smoothness of the floor surface & application technique)

Colours Straw yellow

Composition Mixture of aliphatic and aromatic hydrocarbons

Size 5 litres x 4

Storage/Shelf Life Store and transport securely in an upright position. Ensure the lid is secure. Store for up to 12 months from date of manufacture in original, unopened packaging in cool, dry conditions within the temperature range +5°C to +30°C and out of direct sunlight. Protect from frost.

Application Temperature +5°C to +30°C

Service Temperature -20°C to +50°C

Drying Times Full bond strength is achieved within 24 to 48 hours (depending on ambient conditions)

Open Times The maximum open time is up to 75 minutes. However, bonds should be made within 30 minutes of adhesive drying

Cleaning Clean tools and equipment with white spirit immediately after use

Key Features

Flooring grade

Instant bond and high shear strength

For PVC and rubber nosing & skirting

MULTI-FUNCTIONAL SOLVENT BASED CONTACT ADHESIVE FOR FLOOR COVERINGS

Bostik CONTACT N320 MULTI is a synthetic rubber/resin contact adhesive specifically developed for the contract flooring industry. It is recommended for bonding PVC*, rubber and cork. It can be used to bond a variety of accessories such as covings, capping strips, and sheet and tile coverings to a variety of substrates, including cementitious screeds, concrete, metal and wood. Bostik CONTACT N320 Multi is particularly suitable where a level of moisture and heat resistance is required and may be used to bond lightweight materials to vertical surfaces and ceilings. *Check with floor covering manufacturers regarding use with heterogeneous floor coverings. Bostik CONTACT N320 Multi is not recommended for use on or with solvent sensitive materials such as polystyrene, cellulose paints or bituminous products (including asphalt). It is also unsuitable where the surfaces to be bonded do not have intimate contact

Case Study

Bostik – Flooring in Healthcare

Technical advice and quality subfloor preparation products and flooring adhesives from Bostik are said to have enabled the progress of the new hospital building.