BOSTIK VITRI FLEX

Product Codes

Grey 30810459
White 30811618

DataSheets

Technical Data Sheet

tds01593-mc250-vitri-flex-1.pdf

Safety Data Sheet

https://bostiksds.thewercs.com/MyDocuments/DownloadSingleFile?content=D7460343-6C07-4844-9C96-CE429D77DB4E_PDF

Product
Characteristics

Coverage 5M2

Colours Grey & White

Composition Polymer modified cement powder

Pot Life Approx. 30 minutes at 20°C

Open Time Approx. 20 minutes at 20°C

Set Time Approx. 2 to 3 hours at 20°C

Key Features

Excellent adhesion to fully vitrified, porcelain and stone tiles

Needs no flexible additives – just mix with water

Suitable for use with 15mm Marine Grade Plywood

RAPID SET FLEXIBLE WALL & FLOOR TILE ADHESIVE

Bostik MC250 Vitri-Flex is a fast setting, thin or thick bed adhesive. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to walls and floors.

Bostik MC250 Vitri-Flex is formulated for fast track installation and enables tiles to be grouted approx. 2 to 3 hours after fixing depending on conditions. Bostik MC250 Vitri-Flex provides excellent grip and adhesion.

Bostik MC250 Vitri-Flex is suitable for most interior and exterior installations including more demanding installations, such as use with underfloor heating and areas subject to limited vibration. When fully cured the adhesive is suitable for permanently wet areas such as showers and swimming pools. It will bond to concrete, plaster, sand/cement render and screeds, blockwork, brickwork, glazed surfaces, vinyl tiles and plywood overlay.

Case Study

Bostik – Flooring in Healthcare

Technical advice and quality subfloor preparation products and flooring adhesives from Bostik are said to have enabled the progress of the new hospital building.